NEWS
More Information
One minute describes the basic structure of the Remo connector
Release Date:
2022-11-18 09:51
Source:
Lemo connectors are mainly divided into seven series: B series, K series, S series, C series, F series, P series, 2E series, etc. There are also several other uncommon classifications, among which B series is commonly used. The scope of application is also very wide. The function of Lemo connectors: mainly provides convenient electrical plug-in connections in electronic products and power equipment, and is widely used in electronic products. In these equipment, the production and maintenance efficiency of electronic products has been greatly improved, due to With the wide application of plug connections, the reliability of the connection and the resistance of the contact points are increasingly important to the quality of the product. Therefore, it is necessary to have an understanding of the performance of the connector used in order to use the connector reasonably and correctly.
The structure and product classification of Remo connectors
1. Basic structure of Lemo connector:
The contact component is the core part of the Remo connector to complete the electrical connection function. Usually, it consists of an anode contact and a cathode contact. The electrical connection is completed by inserting the female contact and the male contact. The anode contact is A rigid component with a cylindrical (round pin), square cylindrical (square pin) or flat (insert blade) shape, with an anode contact usually made of brass and phosphor bronze, and a cathode contact, the jack, It is the key part of the contact pair. With the help of the elastic structure, when the pin is inserted, the elastic force is generated to form close contact with the male contact to complete the connection. There are many types of jack structures, including cylindrical (split groove, shrinkage), Tuning fork, cantilever, etc., beam (longitudinal groove), folding (longitudinal groove, "9"), box (square jack) and double-sided steel wire spring jack, etc.,
(2) Insulator, also called base or mounting plate, is used to arrange the contacts at the required position and spacing to ensure the insulation performance between the contacts and between the contacts and the outer wall, good insulation resistance, withstand voltage and Processing performance is the basic requirement for selecting insulating materials processed into insulators.
(3) Enclosure, also known as housing (depending on the type), is the housing of the connector that provides mechanical protection for the built-in insulating mounting plate and pins and provides alignment when the plug and receptacle are inserted, thereby connecting the The device is secured to the device.
(4) Accessories, accessories are divided into structural accessories and installation accessories, circlips, positioning keys, positioning pins, guide pins, connecting rings, cable clamps, sealing rings, gaskets and other accessories, installation accessories such as screws, nuts, screws and Spring coils and most accessories have standard parts and universal parts.
2. Classification of Remo connector products:
Technically speaking, there are only two basic ways to divide connector product categories: round and rectangular (cross-section) according to shape and structure, and low and high frequency (bounded by 3MHz) according to operating frequency.
Contact Us
Add: Dongguan City, Guangdong Province
Tel: 86-18128578276（WeChat）
E-mail: tt03@cnttkj.com
Web: www.cnttkj.cn
Follow Us
Copyright 2022 Tongtian Electronic Technology (Dongguan) Co., Ltd. Powered by www.300.cn SEO